Learn · Payroll

How to pay international contractors: tax forms and payment options.

Classification, W-8BEN versus W-9, when a 1099-NEC applies, and the trade-offs between wires, employers of record and contractor payroll in USDC or local currency.

On this page

In short

How do you pay international contractors?

Sign a contractor agreement, collect the right tax form (a W-8BEN for a foreign individual, a W-9 for a US person), then pay each invoice by international wire, a local-rail payout in their currency, or USDC. Local rails and USDC usually arrive faster and in full; wires can lose intermediary fees in transit.

General US tax information, not tax advice · IRS sources checked 21 Nov 2026

What do you need before paying an international contractor?

Three things, in this order. Getting them right before the first payment is much cheaper than fixing them after a year of invoices.

  1. Confirm they are really a contractor

    Check the classification rules in the country where the person works. Control over hours and methods, exclusivity, and being integrated into your team all point towards employment in most jurisdictions.

  2. Sign a written contractor agreement

    Cover scope, rate, invoicing schedule, payment currency and method, intellectual property assignment, confidentiality and termination. The agreement is what you point to if classification is ever questioned.

  3. Collect the right tax form

    Form W-8BEN from a foreign individual, Form W-8BEN-E from a foreign company, or Form W-9 from a US person. Keep it on file; you will need it at year end.

Do you need to file a 1099-NEC for a foreign contractor?

Generally no. Form 1099-NEC reports payments for services to US persons. A foreign individual who performs all of the work outside the United States is not a US person, and payment for that work is generally not US-source income, so the usual practice is to collect a W-8BEN and not issue a 1099. If the contractor does any of the work while physically in the US, the answer can change, and that is a question for a tax adviser.

For US contractors, you file Form 1099-NEC once the payments you made in the year reach the reporting threshold. That threshold was $600 for payments made through 2025. The One Big Beautiful Bill Act raised it to $2,000 for payments made from 1 January 2026, with inflation adjustments after that. The form goes to the contractor and to the IRS by 31 January of the following year.

Which tax form for which contractor (US company)
ContractorForm you collectYear-end filing
Foreign individual, working outside the USW-8BENGenerally none
Foreign company, working outside the USW-8BEN-EGenerally none
US citizen or resident, anywhereW-91099-NEC at or above the threshold
US-registered company (non-corporate)W-91099-NEC at or above the threshold

General rules from IRS form pages, checked 21 Nov 2026. Payments to corporations are generally exempt from 1099-NEC reporting, with exceptions. This is not tax advice.

What is the best way to pay contractors abroad?

Ways to pay an international contractor

What each option is good for. Glide pays contractors; it is not an employer of record.

Ways to pay an international contractor
FeatureBank wireFrom your bankEmployer of recordEORContractor payroll on Glide
What it is forOccasional one-off paymentsPeople who are legally employees in a country where you have no entityRecurring payments to genuine contractors
Contractor chooses how they are paidNoUsually local salary onlyYes
Typical arrival1-3 business daysOn the local payroll cycleSeconds in USDC; same day on SEPA and Faster Payments
Amount can shrink in transitYesNoNo
Handles local employment tax and benefitsNoYesNo
Cost basisEOR and bank pricing vary by provider and country.Bank fee plus intermediary fees and FX marginA monthly fee per workerNo platform fee; published per-rail transfer fees

Glide column from the payroll and pricing pages. Reviewed 21 Nov 2026.

If the person is legally an employee in their country, a payments platform does not change that. You need a local entity or an employer of record. For genuine contractors, the practical question is how to pay a growing list of people in different countries without a manual wire for each one.

Should you pay international contractors in USDC?

Offer it rather than impose it. Many contractors, especially in countries with volatile currencies or slow banking, prefer USDC because it tracks the US dollar one to one and arrives in seconds. Others need money in their local bank account to pay rent. The approach that works is to let each contractor choose, and to keep the employer side identical either way.

Paying in USDC does not change the tax picture. The contractor still has income in their country, and you still record the payment at its dollar value. The stablecoin payroll guide covers the accounting and the compensation-design questions in more depth.

How does contractor payroll work on Glide?

  1. Create contracts

    Add contractors one by one or import a CSV. Set a fixed rate, hourly rate or milestones, a pay frequency and dates once.

  2. Each contractor picks how they are paid

    They accept the contract and choose USDC on a supported chain, their local bank in one of 50 payout currencies, or a split of both. They can change it later without asking you.

  3. Fund once and approve

    Generate the run from active contracts and review the per-person fee breakdown. One funding event fans out across every rail your team chose. Large runs can require sign-off, and a run from an M-of-N vault becomes a proposal for your co-signers.

  4. Keep the records

    Every run produces a receipt per person, and per-contractor yearly totals stay attached to the contracts: the record you or your accountant need for year-end 1099-NEC filing for US contractors.

Contractor payroll on Glide at a glance
FeatureDetail
Contract typesFixed rate, hourly or milestone
SchedulesWeekly, biweekly or monthly, plus off-cycle payments
How contractors are paidUSDC on a supported chain, a local bank rail, or a split
Bank railsIncluding ACH, SEPA, Faster Payments, PIX and international wire
FeesItemised per person and per rail before you execute
Platform feeNone
ApprovalsSign-off on large runs; M-of-N vault proposals
If a payment partner is downThe run routes through an alternative

From the Glide payroll and pricing pages. Reviewed 21 Nov 2026.

Transfer fees are published per rail and quoted with the transfer, before you confirm it. Glide is a fintech company, not a bank and not a money transmitter. Every regulated service — holding funds, executing payments, converting currency — is provided by licensed partner fintechs and banks under their own permissions.

Frequently asked questions

Do I need to issue a 1099 to a foreign contractor?
Generally no. A foreign individual who does all of the work outside the US gives you a Form W-8BEN and does not receive a Form 1099-NEC. Confirm with a tax adviser if any work is done in the US.
What is the 1099-NEC threshold?
$600 for payments made through 2025. The One Big Beautiful Bill Act raised it to $2,000 for payments made from 1 January 2026, with inflation adjustments in later years.
Can I pay contractors in USDC?
Yes, if the contractor wants it. USDC tracks the US dollar one to one and settles in seconds. It does not change the tax treatment of the payment for either side.
What is the difference between a contractor platform and an employer of record?
A contractor payment platform pays independent contractors. An employer of record legally employs the person in their country and runs local payroll tax and benefits. If someone is an employee under local law, you need an EOR or a local entity.
Does Glide charge per contractor?
No. There is no subscription or per-seat fee. You pay the published transfer fee for each rail, itemised per person before you execute the run.

Sources

External links open in a new tab.

  1. About Form 1099-NEC, Nonemployee Compensation - Internal Revenue ServiceChecked 21 Nov 2026
  2. About Form W-8BEN, Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding and Reporting (Individuals) - Internal Revenue ServiceChecked 21 Nov 2026
  3. About Form W-9, Request for Taxpayer Identification Number and Certification - Internal Revenue ServiceChecked 21 Nov 2026
  4. Independent contractor (self-employed) or employee? - Internal Revenue ServiceChecked 21 Nov 2026

Written by

Glide Research

Payments research

Glide Research maps payment rails, FX corridors, and banking access so travellers, freelancers, and treasury teams can move money without legacy wire tax.

Published

Glide · Learn

How to pay international contractors: tax forms and payment options.

Run payroll and cross-border payments from one account: hold USDC and 2 currencies, convert close to the mid-market rate, and pay out on local rails instead of paying the wire tax. Solo, or with multisig for teams.

Global reach
100+ countries
Custody
Wallets and vaults you control; fiat held at regulated partners
Regulated legs run by
Licensed partners