Learn · Business payments

Cross-border B2B payments: routes, costs and timing.

How a business pays suppliers and partners abroad: international wires, local-rail payouts and USDC compared on speed, cost and what the recipient needs.

On this page

In short

What is a cross-border B2B payment?

A cross-border B2B payment is money one business sends to another in a different country, usually to settle an invoice. It moves over an international wire, a local payment rail in the recipient's country after a currency conversion, or a stablecoin such as USDC. Each route trades off speed, cost, and what the recipient can accept.

Settlement times from Glide's quote engine · reviewed 21 Nov 2026

How do cross-border B2B payments work?

Every cross-border payment has to do two things: change the currency and cross a border between payment systems. The route you choose decides where each of those happens and who takes a cut along the way.

With a traditional international wire, your bank sends a SWIFT message and the money travels bank to bank until it reaches the recipient's bank. If the two banks have no direct relationship, one or more correspondent banks sit in between. With a local-rail payout, a provider converts the money and then pays the recipient from inside their own country, as a domestic payment. With a stablecoin, the money moves as a token on a public blockchain and the recipient either holds it or converts it locally.

What are the ways to send a cross-border B2B payment?

Three routes for paying a business abroad

General characteristics of each route. Settlement times are the values Glide's quote engine displays for that rail.

Three routes for paying a business abroad
FeatureInternational wireSWIFTLocal-rail payoutSEPA, Faster Payments, PIXStablecoinUSDC
What the recipient needsAccount number or IBAN, plus the bank's SWIFT/BICOrdinary local account detailsA wallet address on a supported chain
Typical settlement1-3 business daysSame day on SEPA and Faster Payments; instant on PIXSeconds
Runs on weekendsNoDepends on the railYes
Amount can shrink in transitIntermediary banks on a wire may deduct their own fees.YesNoNo
Currency conversionBy the sending or receiving bankBy the provider, before the payoutNone in transit; the recipient converts if needed
Best whenThe recipient can only accept a wireThe recipient has a local account in a supported countryBoth sides already use stablecoins

Settlement times from RAIL_FEE_SCHEDULE in Glide's fee model. Bank cut-off times and recipient-bank processing can add time. Reviewed 21 Nov 2026.

How much does a cross-border B2B payment cost?

There are two costs, and the second is the one most often missed. The first is the transfer fee: what your provider charges, plus any intermediary or receiving-bank fees on a wire. The second is the currency conversion. If a provider converts at a rate worse than the mid-market rate, the difference is a fee too, even when the invoice says "free transfer".

On Glide, the two are shown separately. Conversions are quoted at the mid-market rate, with the cost charged as a visible fee rather than buried in the rate. Transfer fees are published per rail and quoted with the transfer, before you confirm it. Using the platform itself costs nothing; the full schedule is on the pricing page.

How long does an international business payment take?

It depends on the rail far more than the provider. Glide's quote engine shows these settlement times: international wires 1-3 business days, SEPA and Faster Payments the same day, PIX instantly, US ACH 1-2 business days, and USDC in seconds on Solana and about fifteen seconds on EVM chains. Bank cut-off times, public holidays and a recipient bank's own checks can add to any of them.

For a deeper look at why wires take days, read SWIFT wires explained. For the domestic rails that make local payouts fast, see the SEPA guide and the Faster Payments guide.

What documents do you need for a cross-border B2B payment?

Providers are required to know who is paying whom and why, so expect to be asked for some or all of these, especially on larger or first-time payments:

  • Your own business verification (KYB): registration documents and the people who own and control the company.
  • The recipient's legal name and address, exactly as their bank holds it.
  • Their bank details in the format their country uses: IBAN, sort code and account number, CLABE, or account and branch code.
  • The purpose of the payment, and sometimes the invoice or contract behind it.
  • For stablecoin payments, a wallet address that passes sanctions screening.

On Glide, fiat payouts unlock after identity and business verification through Glide's regulated partner, and crypto transfers are sanctions-screened before they broadcast. More on how that works is on the compliance page.

When should a business pay suppliers in USDC?

When the supplier already holds or accepts stablecoins, and speed or weekend settlement matters. USDC tracks the US dollar one to one, so an invoice in dollars can be settled for the same number of USDC without a conversion, and it arrives in seconds rather than days.

It is the wrong choice when the supplier has to convert it back to local currency at a poor rate, or when their accountant cannot book it. A stablecoin is not a bank deposit and carries issuer and smart-contract risk; the stablecoins guide covers the trade-offs. For holding a stablecoin balance as a business, see the stablecoin treasury guide.

How does Glide handle cross-border B2B payments?

A Glide business account holds US dollars, euros and USDC in one place. Hold dollars and euros, with a US account and routing number and a euro IBAN once verification is approved. From there you can pay a supplier abroad on their local rail in 50 currencies, pay in USDC on a supported chain, or send an invoice that the customer can settle either way.

What a Glide business account does for cross-border payments
CapabilityHow it works on Glide
Account currenciesUSD and EUR bank details, plus USDC wallets on EVM chains and Solana
Local payouts50 currencies, over rails such as SEPA, Faster Payments, PIX and SPEI
ConversionQuoted at the mid-market rate with the fee shown separately, before you confirm
Platform feeNone. You pay the published per-rail transfer fee and network gas
ApprovalsPayments from an M-of-N vault become proposals your co-signers approve
Getting paidInvoices in USD, EUR or GBP, payable in USDC or by bank transfer
ScreeningSanctions screening on crypto sends before broadcast

From the Glide pricing page, product pages and payout currency registry. Reviewed 21 Nov 2026.

Glide is a fintech company, not a bank and not a money transmitter. Every regulated service — holding funds, executing payments, converting currency — is provided by licensed partner fintechs and banks under their own permissions.

Frequently asked questions

What is the cheapest way to pay a business abroad?
Usually a local-rail payout or a stablecoin transfer, because both avoid intermediary bank fees. Compare the amount the recipient receives, including the conversion rate, rather than the transfer fee alone.
How long does a cross-border B2B payment take?
An international wire typically takes 1-3 business days. A local-rail payout arrives the same day on SEPA and Faster Payments and instantly on PIX. USDC settles on-chain in seconds.
Why did my supplier receive less than I sent?
On a SWIFT wire, intermediary and receiving banks can deduct their own fees in transit. A local-rail payout or a stablecoin transfer does not pass through correspondent banks, so the quoted amount is the amount that arrives.
Can I pay an overseas supplier in USDC?
Yes, if the supplier can receive USDC on a chain you both support. It settles in seconds at any hour and needs no conversion for a dollar invoice, but the supplier carries the cost of converting it if they need local currency.
Does Glide charge a platform fee on international payments?
No. Using Glide costs nothing. You pay the published transfer fee for the rail and network gas on crypto sends, and both are shown before you confirm the payment.

Sources

External links open in a new tab.

  1. Enhancing cross-border payments: the G20 roadmap - Financial Stability BoardChecked 21 Nov 2026
  2. SEPA payment schemes - European Payments CouncilChecked 21 Nov 2026
  3. Faster Payment System - Pay.UKChecked 21 Nov 2026
  4. Pix - Banco Central do BrasilChecked 21 Nov 2026

Written by

Glide Research

Payments research

Glide Research maps payment rails, FX corridors, and banking access so travellers, freelancers, and treasury teams can move money without legacy wire tax.

Published

Glide · Learn

Cross-border B2B payments: routes, costs and timing.

Run payroll and cross-border payments from one account: hold USDC and 2 currencies, convert close to the mid-market rate, and pay out on local rails instead of paying the wire tax. Solo, or with multisig for teams.

Global reach
100+ countries
Custody
Wallets and vaults you control; fiat held at regulated partners
Regulated legs run by
Licensed partners